JINPAT's pneumatic hydraulic rotary joints are designed to facilitate the uninterrupted transmission of fluids (such as hydraulic oil) and gases (such as compressed air) between stationary and rotating components. JINPAT's LPPA-LM series rotary joints can rotate 360 degrees. The transmission medium can be inert gas, such as compressed air or vacuum. A slip ring can be integrated to transmit various control signals. The sealing surfaces and sealing rings are made of special materials, offering advantages such as wear resistance, long service life, corrosion resistance, and leak prevention. Customers can install the LPPA rotary union independently according to their application environment.
| Rotary Unions & Joints Spec. | |||
Passages |
1~4 |
Joint thread |
M5 |
Trachea Size |
φ3 |
No-load Torque |
≤0.8 N.m |
Medium Type |
Air, Vacuum |
Max.Operating Pressure |
Positive Pressure: 1 Mpa Vacuum: -95 kPa |
| Electronic & Electri | Mechanical | ||
Tatal |
6 CKT | Working Speed | 0~300rpm |
Detail |
6*2A | Inner Diameter |
/ |
Rating Voltage |
0~240V AC/DC |
Contact Material | Gold To Gold |
| Dielectric Strength | 500VAC@50Hz |
Housing Material | Aluminum Alloy(Black)+Engineering Plastics |
| Insulation Resistance | ≥1000MΩ500VDC | Lead Wire Length | Stator: 250mm Rotor: 250mm |
| Environment | Remarks | ||
Working Temperature |
-20°C~+60°C |
Application |
customizable |
Working Humidity |
≤60％RH |
Other |
/ |
IP |
IP40 |
Note:“P”stands for power,"S"stands for signal. |
|